Autocad Lt 2002 Service Pack 1

You can find links for the 2002 SP1.exe and SP2.exe in steps 6 & 7 of this guide to installing LT2002 on windows 7 or 8I've not tried them as I dont have 2002, but the article is only 2 months old and the download links seem valid.As for the fatal error when opening a drawing, some users have reported this before with 2000/2002/2004 running on windows 7 and that just plugging a memory stick into any USB port solves the problem. (No-one knows why but it works).Last edited by NukeCad; at 03:58 PM.

The Readme contains the latest information regarding the installation and use of this service pack. It is strongly recommended that you read the entire document before you apply the service pack to your product. For your reference, you should save the Readme to your hard drive or print a copy.

I am running autocad 2002LT on windows XP.I have tried to install the service pack 1 onto my machine but to no avail. I have downloaded the file onto my pc and gone through the setup proceedure as stated in the literature by going through control panel, add & remove, re-install etc., (it does not give me the opertunity to say where the downloaded file is), the pc then goes through what looks like a re-install with new parts but when I check the version number I am showing K.0.30, which is what it started with.If I double click onto the downloaded file I get a message back saying 'error 114' the autocad 2002 update was not applied'. Does the downloaded file need to be in specific folder or not. Fanuc programming manual.

How do I go about installing the service pack onto my machine as the instructions followed did not prove to be of help. Make sure you are not applying the wrong Serrvice Pack such as trying toapply the full AutoCAd Service Pack to the AutoCAD LT or the incorrectlanguage version.Sincerely,Shaan HurleyAutodesk, Inc.'

'error 114' normally means you got the wrong one for your AutoCAD product.-Dean Saadallahwww.pendean.com-'paevans' wrote in messagenews:f0c160a.-1@WebX.maYIadrTaRb. I am running autocad 2002LT on windows XP. I have tried to install the service pack 1 onto my machine but to noavail.

I have downloaded the file onto my pc and gone through the setupproceedure as stated in the literature by going through control panel, add &remove, re-install etc., (it does not give me the opertunity to say wherethe downloaded file is), the pc then goes through what looks like are-install with new parts but when I check the version number I am showingK.0.30, which is what it started with. If I double click onto the downloaded file I get a message back saying'error 114' the autocad 2002 update was not applied'. Does the downloadedfile need to be in specific folder or not. How do I go about installing theservice pack onto my machine as the instructions followed did not prove tobe of help.